DAQ-1200 from $695
High Speed Data Acquisition Board for IBM AT and Compatibles
- Up to 400 KHz Sample/sec with
DAQ-1200
- 12 Bit Resolution
- 16 Single-Ended or
Eight Differential
Analog Channels, Software Configurable
- Analog Input Expandable to 256 Channels
- One 32-Bit Digital I/O, Two 12-Bit D/A, and Three 16-Bit Counter/Timers
- Software Programmable Gain of 1, 10, 100,
and 1000 for
DAQ1201
and 1, 2, 4 and 8 for
DAQ1202
- DATA FIFO 1K Samples and SCAN List FIFO 512 Samples
- 16-Bit AT Bus
OMEGAÆs DAQ-1200 series are data acquisition systems with 12-bit analog input, 32-bit digital I/O, two channels of D/A, and three 16-bit programmable timer/counters. The maximum sampling rate is 330 KHz for the DAQ-1100 and 400 KHz for the DAQ-1200.
The DAQ-1200 offers
16 channel single-ended or eight channel differential analog inputs with 12-bit resolution. The input voltage is jumper selectable for either unipolar or bipolar ranges. The DAQ-1101 and DAQ-1201 provide software programmable gains of 1, 10, 100, and 1000. The DAQ-1102 and DAQ-1202 provide software programmable gains of
1, 2, 4, and 8. The analog I/O connection, eight bits of digital I/O and their control lines, are accessed via a D-37 connector that fits in the rear slot of a PC. A second auxiliary D-37 connector is provided to the user for adding up to 24 additional digital I/O lines. This is via a ribbon cable from the board which will need to occupy an additional opening in the back of the PC.
The DAQ-1200 contain a data FIFO. The data FIFO provides the cushion for the stream of data coming from the output of A/D conversion and can facilitate the data integrity using interrupts under Windows. The DAQ-1200 also contains a scan list FIFO.
The SCAN LIST FIFO is used for scanning the input channels with their corresponding gains.
SOFTWARE:
The DAQ-1100/1200 is supplied with DaqEZ software. DaqEZ is a Windows application which provides real-time data display and datalogging to disk. Once the data is stored to disk it may be imported to spreadsheet and other data analysis programs. Also supplied are software drivers.
The software drivers provide support for various programming languages such as Microsoft C/C++, QuickBasic, TURBO PASCAL. A Dynamic Link Library (DLL) is furnished for all kinds of programming languages under Microsoft Windows. An optional Visual Basic Controls (VBX) called VISUALDAQ is also available for only $195. Third party software is also available for implementing a fully integrated data acquisition system without programming, called LABTECH NOTEBOOK and
Snap-Master.
UIO-37:
Both the main analog I/O connector and the auxiliary digital I/O connector use a standard male 37 pin D-type format. For easy field wiring to the connectors the UIO-37 terminal panel may be used. One UIO-37 is needed for each connector. A CP-DAQ cable is also required to connect each UIO-37 to the DAQ-1100/1200
SPECIFICATIONS:
Analog Input
Input Ranges:
0 to 10V (unipolar) ▒10 V (bipolar) (software selectable)
Channels: 16 single-ended,
8 differential (software-selectable)
Sampling Rate
DAQ-1200
Gain 1000: Single channel mode: 400 KHz
Multi-channel mode: 370 KHz
Gain = 1000: Single or
multi-channel mode: 100 KHz
Output Data Codes: Twos complement
GAIN RANGES:
Model 1201: 1, 10, 100, 1000
Model 1202: 1, 2, 4, 8
Input Impedance: 1M
Over Voltage Protection: ▒20 V
Resolution: 12-bit
Convert Type: Successive approximation
Size of Scan List: 512 K samples
Data FIFO: 4K samples
Zero Error: Adjustable to 0
ANALOG OUTPUTS
CHANNELS 2:
Output Ranges: 0-5V, 0-10V, ▒5V, ▒10V (jumper selectable) Output data coding straight binary
Resolution: 12-bits Digital I/O (8 bits on main D37 connector)
Outputs: 4
Low/High Voltage: 0.4/3.8 V
Source/Sink Current: 0.5/2.5 mA
Inputs: 4 TTL compatible inputs
PROGRAMMABLE TIMER:
Number of Counters: 3
Type: 82C54
Digital I/O (24 bits on auxiliary connector)
Type: 8255A
I/O: 24 bits
Power Requirements: +5Vdc 800 mA typ, 1.0 A max, +12 Vdc 120 mA typ, 160 mA max
ENVIRONMENTS:
Interrupt Level: 3-7, 9-12, 14, 15
DMA Channel: 5, 6, 7
Operating Temperature: 0 to 70░C
Humidity: 0 to 95%
Dimensions Long: 8.5" (22 cm)
High: 4.8" (12 cm)
CONNECTORS:
The analog inputs and eight digital
I/O are connected through a
37-pin D-type connector at the rear of the connector.
An auxiliary D-37 connector is employed to support additional 24-bit digital I/O.
COPY [To Your Hard Drive] Daqsuite Software Now! (includes DaqEZ Windows application program and software drivers)
VIEW an Adobe Acrobat pdf file for more product info (requires Acrobat Reader).
VIEW the DAQ-1100 operator's manual now! (requires Acrobat Reader).
VIEW the DAQ-1200 operator's manual now! (requires Acrobat Reader).
VIEW the Daqdrive Software manual now! (requires Acrobat Reader).
VIEW the Daqdrive Supplemental manual now! (requires Acrobat Reader).
U.S.A. and Canada
|
|
International Callers;
Sales and Service; 203.359.1660
|
|
Please E-Mail any comments
or suggestions to OMEGA®.
® COPYRIGHT 1999
OMEGA
ENGINEERING, INC.
ALL RIGHTS RESERVED |
|
